I worked on the Crow’s Nest a little more. The decking and stairs are going to require quite a bit of planking so I started preparing the wood. 

Using a thread file, I carved woodgrain texture into the smoothe craft sticks. Continue reading →

At long last, the Town Well and Cargo Piles have reached the store. 

The extra castings that I made are now available in the store while they last.

I started on the next building. This one begins life as a simple kit. I envision this shack as a lookout post (or more likely a pirate tavern) on top of a huge outcropping of bolders. I present The Crow’s Nest…

 
This kit was about $5 from Amazon. Now it is nowhere near the quality of the CNC Workshop kits but it should make for a good base for this building.
Continue reading →

Pirates spotted near the second CNC Workshop building.

Borrowing again from Robjedi and with the lessons learned from the first CNC Workshop building, I dove into the second. I added pillars and a covered front porch which increased the footprint quite a bit. Continue reading →

The first of the CNC Workshop buildings is finally done!

Actually, it has been done for a little while. I’m just slow to post.
I borrowed heavily from Robjedi’s Pirate Town for this one. Continue reading →