SummerSculpt Day 10

Today was another quick sculpting session. I didn’t do much really. I added a bit to the deltoid area just to bulk up the shoulders. I also added the beginnings of his hair. At this point, it’s just shaped clay with no real details. image

image
I have also funished making a number of sculpting handles for future projects. Let’s just say now I should never run out.

SummerSculpt Day 9

I only had a short time to sculpt today and I didn’t make it to finish the sword and flintlock yet. So, I worked on the details of the torso and collar area.
image

image
Reviewing the pictures, I might need to add a but more on the deltoids…
Maybe tomorrow.

SummerSculpt Day 7

A slight change of pace for today, I worked on accessories. Specifically the mini needs a sword and a gun so I set to work on those.
First up was the sword. I flattened some copper wire with pliers (hammer and anvil also work). Next I added a 50/50 mix of procreate and aves to the flattened wire. Finally, I squished the putty between a couple of acrylic blocks. Now I just need to wait for the putty to cure.image

image

image
Next I worked on the flintlock. I generally try to make multiple when I sculpt an accessory. In this case I’m working on three. Again I start with copper wire bent to rough shape. The wire will become the barrel so it is left a little long. I add the stock and hardware using the same 50/50 putty mix. I like this mix because if needed, I can file and sand and shape the cured putty to refine the sculpt after the fact. image

image

image
These will need further work but for now both swords and flintlocks are put aside to cure.

SummerSculpt Day 6

Day 6 and still going. I made some more progress today. I started adding the beginning of the details. It seems to be taking shape.image
If you’re interested in learning more about sculpting miniatures, I highly recommend watching Tom Mason’s videos on YouTube. He is a professional sculptor, a great instructor and has helped me quite a lot. His videos are a priceless source of information. So check them out and while you’re at it, support him on Patreon so he can make more videos.